Service Engineer – Advance Technology Consortium Ltd. (Dhaka) – Apply by Dec 30 2025
Posted: Sat Dec 13, 2025 8:39 pm
PREPARATION GUIDE FOR APPLICATION – SERVICE ENGINEER (ADVANCE TECHNOLOGY CONSORTIUM LTD.)
1. UNDERSTAND THE ROLE
- Core duties: selling, promoting, installing and providing after‑sales service for educational training equipment and heavy machinery used in Electrical & Electronics, Mechanical, Civil, Textiles and Biological Science departments.
- The job is full‑time, based in Dhaka.
- No prior experience required – fresh graduates are welcome.
2. CHECK EDUCATIONAL ELIGIBILITY
You must hold one of the following qualifications:
- Diploma in Electronics or Electrical Technology (public polytechnic)
- B.Sc. in Electrical & Electronics Engineering, Mechanical Engineering, or Automobile Engineering (public university)
If you have more than one relevant qualification, include both on your CV.
3. GATHER REQUIRED DOCUMENTS
| Document | Details |
|-|-|
| Curriculum Vitae (CV) | Typed in English, up‑to‑date, covering personal details, education, any projects, internships, technical skills and extracurricular activities. |
| Recent passport‑size color photograph | One (1) clear photo, printed on glossy paper. |
| Academic certificates | Photocopy of B.Sc. or Diploma certificate and transcript. |
| H.S.C. / S.S.C. certificates | Photocopies of these secondary certificates. |
| National ID / Smart Card / Birth Certificate / Passport | Photocopy of any one valid identity document. |
| Specimen signature | Clear handwritten signature (same as on ID). |
All copies should be legible, A4 size, and printed on clean paper. Keep a spare set in case the recruiter asks for additional copies.
4. PREPARE THE APPLICATION LETTER
- Address it to: Managing Director, Advance Technology Consortium Ltd.
- Use formal business letter format (sender’s address, date, recipient’s address, salutation, body, closing).
- State the position you are applying for – “Service Engineer”.
- Briefly explain why your education and interests match the job (e.g., enthusiasm for technical service, ability to learn equipment quickly).
- Mention that you are a fresh graduate ready to contribute.
- End with a courteous closing (“Yours sincerely”) and sign with your specimen signature.
5. FINAL CHECKLIST BEFORE SUBMISSION
1. Proofread CV and cover letter for spelling, grammar, and formatting consistency.
2. Verify that the photograph is recent (within 6 months) and matches the picture on your ID.
3. Ensure all photocopies are clear; avoid shadows or smudges.
4. Confirm that the whole packet (cover letter, CV, photos, certificates, ID copy) is arranged in the order listed above.
5. Use a sturdy envelope, label it clearly with the company’s address:
Advance Technology Consortium Ltd.
12‑A (12th Floor), Center Point, Concord Tower
Tejkunipara, Farmgate, Dhaka‑1215, Bangladesh
6. Write your full name and contact number on the front of the envelope.
6. TIMELINE FOR APPLICATION
- Today – 7 days: Collect all required documents, request transcript copies if not already in hand.
- Next 5 days: Draft CV and cover letter; have a mentor or professor review them.
- Following 2 days: Incorporate feedback, print final versions, obtain photograph and signature.
- Day 14: Assemble the application packet, do a final check, and post/mail to the address above.
- Day 15–30: Follow up with a polite phone call or email (if a generic company email is found) to confirm receipt.
7. INTERVIEW PREPARATION (IF CALLED)
- Product Knowledge – Review common educational equipment and heavy machinery used in the listed departments. Familiarise yourself with basic operation, safety standards, and typical maintenance tasks.
- Technical Fundamentals – Refresh concepts from your diploma/degree: circuit basics, motor control, hydraulics, mechanical drawings, and basic troubleshooting.
- Sales & Communication – Practice answering questions about selling techniques, handling objections, and explaining technical features to non‑technical users.
- Customer Service – Be ready to give examples (from internships, group projects, or part‑time jobs) where you solved a problem for a customer or client.
- Behavioral Questions – Prepare STAR (Situation, Task, Action, Result) stories for teamwork, time management, and learning new skills quickly.
- Logistics – Know the exact location of the interview (Concord Tower, Farmgate) and plan your route. Arrive 10‑15 minutes early, dressed in smart‑casual business attire.
8. POST‑APPLICATION ACTIONS
- Keep copies of all submitted documents for your records.
- Set a reminder to check your email and phone daily for any response from the company.
- If you do not hear back within two weeks, you may politely inquire about the status by contacting the managing director’s office.
FINAL TIP: Treat the whole process as a professional project. Present yourself as organized, detail‑oriented, and eager to learn – qualities that are highly valued for a Service Engineer handling diverse equipment and client interactions. Good luck!
1. UNDERSTAND THE ROLE
- Core duties: selling, promoting, installing and providing after‑sales service for educational training equipment and heavy machinery used in Electrical & Electronics, Mechanical, Civil, Textiles and Biological Science departments.
- The job is full‑time, based in Dhaka.
- No prior experience required – fresh graduates are welcome.
2. CHECK EDUCATIONAL ELIGIBILITY
You must hold one of the following qualifications:
- Diploma in Electronics or Electrical Technology (public polytechnic)
- B.Sc. in Electrical & Electronics Engineering, Mechanical Engineering, or Automobile Engineering (public university)
If you have more than one relevant qualification, include both on your CV.
3. GATHER REQUIRED DOCUMENTS
| Document | Details |
|-|-|
| Curriculum Vitae (CV) | Typed in English, up‑to‑date, covering personal details, education, any projects, internships, technical skills and extracurricular activities. |
| Recent passport‑size color photograph | One (1) clear photo, printed on glossy paper. |
| Academic certificates | Photocopy of B.Sc. or Diploma certificate and transcript. |
| H.S.C. / S.S.C. certificates | Photocopies of these secondary certificates. |
| National ID / Smart Card / Birth Certificate / Passport | Photocopy of any one valid identity document. |
| Specimen signature | Clear handwritten signature (same as on ID). |
All copies should be legible, A4 size, and printed on clean paper. Keep a spare set in case the recruiter asks for additional copies.
4. PREPARE THE APPLICATION LETTER
- Address it to: Managing Director, Advance Technology Consortium Ltd.
- Use formal business letter format (sender’s address, date, recipient’s address, salutation, body, closing).
- State the position you are applying for – “Service Engineer”.
- Briefly explain why your education and interests match the job (e.g., enthusiasm for technical service, ability to learn equipment quickly).
- Mention that you are a fresh graduate ready to contribute.
- End with a courteous closing (“Yours sincerely”) and sign with your specimen signature.
5. FINAL CHECKLIST BEFORE SUBMISSION
1. Proofread CV and cover letter for spelling, grammar, and formatting consistency.
2. Verify that the photograph is recent (within 6 months) and matches the picture on your ID.
3. Ensure all photocopies are clear; avoid shadows or smudges.
4. Confirm that the whole packet (cover letter, CV, photos, certificates, ID copy) is arranged in the order listed above.
5. Use a sturdy envelope, label it clearly with the company’s address:
Advance Technology Consortium Ltd.
12‑A (12th Floor), Center Point, Concord Tower
Tejkunipara, Farmgate, Dhaka‑1215, Bangladesh
6. Write your full name and contact number on the front of the envelope.
6. TIMELINE FOR APPLICATION
- Today – 7 days: Collect all required documents, request transcript copies if not already in hand.
- Next 5 days: Draft CV and cover letter; have a mentor or professor review them.
- Following 2 days: Incorporate feedback, print final versions, obtain photograph and signature.
- Day 14: Assemble the application packet, do a final check, and post/mail to the address above.
- Day 15–30: Follow up with a polite phone call or email (if a generic company email is found) to confirm receipt.
7. INTERVIEW PREPARATION (IF CALLED)
- Product Knowledge – Review common educational equipment and heavy machinery used in the listed departments. Familiarise yourself with basic operation, safety standards, and typical maintenance tasks.
- Technical Fundamentals – Refresh concepts from your diploma/degree: circuit basics, motor control, hydraulics, mechanical drawings, and basic troubleshooting.
- Sales & Communication – Practice answering questions about selling techniques, handling objections, and explaining technical features to non‑technical users.
- Customer Service – Be ready to give examples (from internships, group projects, or part‑time jobs) where you solved a problem for a customer or client.
- Behavioral Questions – Prepare STAR (Situation, Task, Action, Result) stories for teamwork, time management, and learning new skills quickly.
- Logistics – Know the exact location of the interview (Concord Tower, Farmgate) and plan your route. Arrive 10‑15 minutes early, dressed in smart‑casual business attire.
8. POST‑APPLICATION ACTIONS
- Keep copies of all submitted documents for your records.
- Set a reminder to check your email and phone daily for any response from the company.
- If you do not hear back within two weeks, you may politely inquire about the status by contacting the managing director’s office.
FINAL TIP: Treat the whole process as a professional project. Present yourself as organized, detail‑oriented, and eager to learn – qualities that are highly valued for a Service Engineer handling diverse equipment and client interactions. Good luck!